Sales-Service-Rental-Parts

                            SERVING MUNICIPALITIES-CONTRACTORS-DO-IT-YOURSELFERS- HOME-OWNERS
 
Dump Bodies-Utility Bodies-Snowplows-Salt Spreaders-Excavators-Skid Steers-Tarp Systems-Tool Boxes-and Much More

 









Powell's Sales & Service
1305 Justus Blvd.
Clarks Summit, Pa. 18411

Phone:   570-587-2743
TollFree 888-44powell
Fax        570-586-6553

Hours:
Mon.-Fri.  7:30 to 5:00
Sat.            7:30 to 4:30
Sunday       Closed


This page designed & maintained by
Michael Brelish.

Page was last edited
 03/29/2007 03:39:52 PM

Copyright 2007 ©
Michael Brelish.

All Rights Reserved.

 

 

 

 

 

 

 

 

 

 

Outback Brush Cutter

Reclaim Overgrown Property with Ease
Say good-bye to sickle mowers, hand held cutters, chainsaws etc. Designed for abuse, the Outback® Brush Cutter cuts a clear path through the densest brush, grass and weeds over 8 feet tall, saplings up to 1.5 inches in diameter and other problem vegetation at the rate of 2/3 acre per hour.

The Outback® was designed to perform under extreme conditions while reducing service requirements and downtime.

A heavy-duty steel deck and engine base provide maximum durability. Non-twisting Kevlar belts, solid non-pivoting frame, reinforced spindle assembly and new limited-slip transaxle mean the Outback® is ready for business anytime, anywhere.
  
Applications
Clearing brush
Clearing vegetation
Maintaining trails
Maintaining rights-of-way

Model No. BC2402IC - 13 HP B&S Intek IC
BC2402ICE - 13HP B&S Intek IC Electric Start
BC2402H - 13HP Honda GXV
BC2402HE - 13 HP Honda GXV
electric start
Drive System
Transaxle
Ground Speed

3 forward/1reverse with limited slip feature
1st - 1.79MPH
2nd - 2.37 MPH
3rd - 3.69 MPH
Reverse - 2.77 MPH
Blade Clutch Blade brake/clutch
Maximum Slope BC2402IC - 15°
BC2404ICE - 15°
BC2402H - 20°
BC2402HE - 20°
Cut Width 24”
Deck Width 27.5”
Cut Height Adjustable from 2-3/4” to 3-3/4”
Wheels - Rear 16” diameter with puncture sealant
Unit Weight BC2402IC - 282 lbs.
BC2404ICE - 287 lbs. without battery
BC2402H - 278 lbs.
BC2402HE - 282 lbs. without battery
Length - Overall 82.5”
Height 43”

Quiet Blower

Control Hurricane-Force Winds with Your Fingertip
Pound for pound, the Billy Goat QB Quiet Blow wheel blowers will outperform other wheel blowers by any measure.

A 14-blade nylon fan, large radius housing ad venturi intake maximizes the incoming air volume and outgoing air velocity. The nylon fan makes the unit easier to start because of its low inertia.

Typically weighing 20+ pounds less than competitive units for the same horsepower, the QB is much easier to push through the grass.

The Exhaust Director, a patented Billy Goat design, allows the operator to direct the exhaust air exactly where he wants it. This is particularly useful when blowing up or down slopes, up close to the machine, pushing large leaf piles or when working next to cars and new landscaping. It’s easy to lock the Exhaust Director into an optimum position.
Applications
Leaf & Debris Removal
Litter Removal
Pavement Surface Prep

Model No. QB554HC - 5 HP Honda GC
Performance Industry test standards not yet established
- volume (CFM) and airspeed (MPH) figures not included. Higher horsepower increases fan RPM, volume (CFM) and airspeed (MPH).
(same as medium frame)
Front Wheel 8.5” pneumatic ball bearing
Rear Wheels 10.5” pneumatic ball bearing w/turf tread
Axle 3/4” steel
Housing 12 gauge steel with 0.5” corner radius
Engine Base Single piece, robotically welded
Fan 15.3” diameter
14 bladed glass-filled nylon
Side Exhaust Hand controlled, variable direction
Front Exhaust Slip on, high density polyethylene
Unit Weight 98 lbs.
Length 51.75”
Width 28.5”
Height 39”

You are visitor Hit Counter to this page since 5/20/2006.
This page last updated on 03/06/2007 03:14:22 PM .
This page designed and maintained by Michael Brelish.
Copyright 2006 © Michael Brelish. All rights reserved.